ℹ️ This listing was auto-generated from Mastodon's public data. Jami :heart_cyber: hasn't claimed it, and it doesn't imply any partnership with or endorsement of SocialDB.
Is this you? Claim it · Request removal (free).
🤝
Make a deal with Jami :heart_cyber:
🔒 Paid proposals held safely in escrow — released only when the work's approved.
Followers
997
Account age
3 yrs
💰 Suggested sponsorship rate
$40 – $65 / sponsored post
Estimated from audience size & typical reach — every deal is negotiable and held in SocialDB escrow.
🧰 Free analysis for Jami :heart_cyber:
Known for
27 views
There is only one way to eat an elephant: a bite at a time.
My elephant progress continues. I installed the drawer divider into the case and it all lined up as well as I could have hoped.
#woodworking
26 views
It's been four months since my last update on this build. So sorry! Most of the work halted for some personal reasons but even if it's very slowly being worked on, it's still going forward.
I survived glue-up but didn't take any photos of that. Too damn big. Too damn stressful so here is the case united after clamps and cleanup.
#woodworking
23 views
And after the case was assembled, I realized that I couldn't move it very easily so I had to stop and build a cart to get it on and off my bench. This ugly thing is a blessing! I can just zip it on and off my bench and move it around without any effort.
#woodworking
17 views
Before that, I had an accident with the case falling and it smashed one corner pretty terribly. A very silly and careless accident.
I had to spend some extra time taking off a 1/4" from all around the front edge to get it out. That sucked but I had just enough room next to the first dovetail to get it out and the miters look cleaner now.
#woodworking
📊 Post engagement
14
Avg engagement / post
1.4%
Engagement vs followers
Nov 2022
On Mastodon since
🔥 Top post: There is only one way to eat an elephant: a bite at a time. My e · 27 likes + reposts
📊 Activity & format
Posting cadence
2.8 / week
Posts several times a week.
Content mix
Mostly images
Recent: 0 text · 12 image · 0 video.
Follower / following
3.4×
Follows 291 back. A more reciprocal / networked account.
Recent posts
View on Mastodon ↗
🔥 Top post
There is only one way to eat an elephant: a bite at a time.
My elephant progress continues. I installed the drawer divider into the case and it all lined up as well as I could have hoped.
#woodworking
So with the drawer experiment done and all of the dimensions and complications revealing themselves, I'm feeling "ok" about it because these slides really are awesome.
But I'm also a little disappointed because without a false front, the …
Last thing, at the back of the drawer, the Blum slides have these tabs that insert into a pre-drilled hole on each side. My drawer is 3/8" short. So when they say the drawer needs to be 18" deep, does that mean I need to add another 3/8" t…
Next thing it revealed is that the front of the slider track is going to butt against my face board after I drop it down. So I'll need to notch for that or something.
#woodworking
I'm simultaneously working on a paver patio for our backyard but the cabinet project inches forward. We had a ton of rain this weekend so the patio is on hold until things dry out and I'm back in the shop.
The drawer prototype revealed a l…
Drawer pieces are now thicknessed and Blum slides arrived but now I'm a little worried about how to assemble the drawer with my design. 🤔
I want half-blind dovetails set into the visible face panel; not a false drawer front. And it should …
Onto the drawer! The front face is going to be the large walnut board I mentioned last week and rummaging through my wood stock, I have a bunch of 6/4 cherry that has been sitting for a few years now. I'm going to use that for the sides.
I…
Before that, I had an accident with the case falling and it smashed one corner pretty terribly. A very silly and careless accident.
I had to spend some extra time taking off a 1/4" from all around the front edge to get it out. That sucked…
I have a choice of what I'm going to work on next:
1. Top doors: there will be two that swing out and it will open to show shelving inside
2. Back panels: this will be cedar and I can use my super fun Lie-Nielsen tongue and groove plane
3.…
I've also made the structural divider shelf that will demarcate the single large drawer at the bottom of the cabinet with the top doors. I'm installing it with just some simple dados. I can't be bothered to do any other fancy joinery.
#wo…
And after the case was assembled, I realized that I couldn't move it very easily so I had to stop and build a cart to get it on and off my bench. This ugly thing is a blessing! I can just zip it on and off my bench and move it around witho…
It's been four months since my last update on this build. So sorry! Most of the work halted for some personal reasons but even if it's very slowly being worked on, it's still going forward.
I survived glue-up but didn't take any photos of …
🐘 Community & instance
Home server
hachyderm.io
A tech & engineering server — its members and audience skew toward that niche, so expect a community-aligned, engaged following.
✅ Link-verified
Verified link
Proved ownership of a website linked on their profile — Mastodon's green-check verification, a real identity signal rather than a paid badge.
On Mastodon since
Nov 2022
Joined in the Twitter-exodus wave of late 2022 — part of the migration that made Mastodon a real destination.
💡 Facts
🗓️Joined Mastodon in 2022 — 3 years ago.
👁️Averages 14 views per post.
📤Posts about 2.8× per week.
🕵️ Fake follower check
Estimated89/100
Excellent
Credibility score
99%
Real
Real audience
Low
Fake-follower risk
High
Data confidence
- Est. 99% real, active audience · Low fake-follower risk.
- Strong engagement (~1.4% of followers engage each post) — an active, real audience.
- Verified account.
- Established account (3+ years old).
Heuristic estimate from engagement, follower ratios, account age & growth — a screening signal, not a guarantee.
About
Woodworker (mostly hand tools).
Profile banner: Looking down at puffy clouds from the height of an airplane.
📸 Gallery
🔀 Audience overlap
EstimatedEstimated shared audience with similar creators — useful for avoiding overlap (or doubling down) when planning a campaign.
jebyrnes
15%
Joyce Karam
14%
Neerlandistiek
14%
Félix
13%
Bergisches Bäuerlein
12%
tulip 🌷:BlobCat_uwu:
10%
More like this
Find more →
Mastodon
Bergisches Bäuerlein
@hof@mstdn.social
997
Followers
Mastodon
Joyce Karam ✓
@joycekaram@journa.host
997
Followers
Mastodon
tulip 🌷:BlobCat_uwu:
@platinumtulip@sunny.garden
997
Followers
Mastodon
Neerlandistiek
@neerlandistiek@mastodon.nl
997
Followers
Mastodon
jebyrnes
@jebyrnes@ecoevo.social
997
Followers
Mastodon
Félix
@fay59@tech.lgbt
996
Followers
✉ Message Jami :heart_cyber:
Reaching out to influencers is a Pro feature. Upgrade to message any influencer directly — perfect for brands and agencies booking sponsorships.
- ✓ Message any influencer from their listing
- ✓ The influencer gets notified by email
- ✓ Manage every conversation in one inbox
Already Pro? Log in.
🎤 Event / appearance with Jami :heart_cyber:
Booking an event / appearance is a Pro feature. Upgrade to book Jami :heart_cyber: for an in-person or virtual appearance — payment held safely in escrow until the event is done.
- ✓ Book them for events, livestreams, panels & more
- ✓ Jami :heart_cyber: gets notified by email
- ✓ Fee held in escrow, released after the appearance
Already Pro? Log in.
🚀
You're out of free requests this month
Free accounts get 5 per month. Go Pro for unlimited sponsor pitches, collab requests & sponsorship deals — plus featured placement, the Verified badge, free withdrawals and more.
Upgrade to Pro — $9.95/mo →Your free limit resets on the 1st of next month.